| Base Power (1st Gear) – Net |
128 kW |
| Engine Model |
Cat C7 ACERT |
| Displacement |
7.2 l |
| Bore |
105 mm |
| Stroke |
127 mm |
| High – Ambient Capability |
50 °C |
| Base Power – Net |
128 kW |
| Derating Altitude |
3048 m |
| High Ambient – Fan Speed – Maximum |
1560 r/min |
| Maximum Torque |
996 N·m |
| Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
| Note (2) |
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) |
Maximum torque measured at 1,000 rpm in gears 4-8. |
| Number of Cylinders |
6 |
| Speed at Rated Power |
2000 r/min |
| Torque Rise |
46% |
| VHP Range – Net |
128-143 kW (171-191 hp) |
| Blade Width |
3.7 m |
| Arc Radius |
413 mm |
| Throat Clearance |
120 mm |
| Cutting Edge Thickness |
16 mm |
| Cutting Edge Width |
152 mm |
| End Bit – Thickness |
16 mm |
| End Bit – Width |
152 mm |
| Moldboard – Height |
610 mm |
| Moldboard – Thickness |
22 mm |
| Blade Tip Range – Backward |
5° |
| Blade Tip Range – Forward |
40° |
| Circle Centershift – Left |
752 mm |
| Circle Centershift – Right |
728 mm |
| Maximum Depth of Cut |
735 mm |
| Maximum Lift Above Ground |
480 mm |
| Maximum Shoulder Reach Outside of Tires – Left |
1896 mm |
| Maximum Shoulder Reach Outside of Tires – Right |
1978 mm |
| Moldboard Sideshift – Left |
512 mm |
| Moldboard Sideshift – Right |
663 mm |
| Circle – Outer Diameter |
1530 mm |
| Front Axle – Total Oscillation per Side |
32° |
| Front Axle – Wheel Lean – Left/Right |
18° |
| Gross Vehicle Weight – Typically Equipped |
17271 kg |
| Gross Vehicle Weight – Base – Front Axle |
4259 kg |
| Gross Vehicle Weight – Base – Rear Axle |
10491 kg |
| Gross Vehicle Weight – Base – Total |
14750 kg |
| Gross Vehicle Weight – Typically Equipped – Front Axle |
4936 kg |
| Gross Vehicle Weight – Typically Equipped – Rear Axle |
12335 kg |
| Gross Vehicle Weight – Typically Equipped – Total |
17271 kg |
| Operating Weight – Maximum – Front Axle |
8005 kg |
| Operating Weight – Maximum – Rear Axle |
14865 kg |
| Operating Weight – Maximum – Total |
22870 kg |
| Note (1) |
Base weight calculated on standard machine configuration with 14.00-24 12PR (G-2) tires, SP Rims, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. |
| Note (2) |
Typical operating weight calculated on standard machine configuration with HVAC ROPS Cab, 14.00-24 12PR (G-2) tires, MP rims, ripper, push plate, transmission guard, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. |
Reviews
There are no reviews yet.