| Engine Model |
Cat® C2.2 T |
| Net Flywheel Power |
42 kW |
| Gross Power |
45.5 kW |
| Gross Power – SAE J1995 |
45.5 kW |
| Net Power – ISO 9249 EEC |
42 kW |
| Net Power – SAE 1349 |
42 kW |
| Displacement |
2.2 l |
| Stroke |
100 mm |
| Bore |
84 mm |
| Operating Weight |
2641 kg |
| Rated Operating Capacity |
680 kg |
| Rated Operating Capacity with Optional Counterweight |
726 kg |
| Tipping Load |
1360 kg |
| Breakout Force – Tilt Cylinder |
1852 kg |
| Wheel Base |
986 mm |
| Length – With Bucket on Ground |
3233 mm |
| Length – Without Bucket |
2519 mm |
| Height – Top of Cab |
1950 mm |
| Vehicle Width over Tires |
1525 mm |
| Maximum Overall Height |
3709 mm |
| Bucket Pin Height – Maximum Lift |
2854 mm |
| Bucket Pin Height – Carry Position |
200 mm |
| Reach – Maximum Lift/Dump |
505 mm |
| Clearance at Maximum Lift and Dump |
2169 mm |
| Ground Clearance |
195 mm |
| Departure Angle |
26° |
| Bumper Overhang – Rear Axle |
967 mm |
| Maximum Dump Angle |
40° |
| Turn Radius from Center – Rear |
1502 mm |
| Turn Radius from Center – Coupler |
1195 mm |
| Turn Radius from Center – Bucket |
1944 mm |
| Maximum Reach – With Arms Parallel |
1291 mm |
| Rack Back Angle – Maximum Height |
81° |
| Maximum Loader Hydraulic Pressure |
23000 kPa |
| Maximum Loader Hydraulic Flow |
104 l/min |
| Hydraulic Power (1) |
23.2 kW |
| Hydraulic Power (2) |
37.7 kW |
| Hydraulic Flow (1) |
Standard |
| Loader Hydraulic Pressure |
23000 kPa |
| Loader Hydraulic Flow (1) |
61 l/min |
| Hydraulic Power – Calculated |
37.7 kW |
| Hydraulic Flow (2) |
High Flow |
| Loader Hydraulic Flow (2) |
104 l/min |
| ROPS |
SAE J1040 MAY94, ISO 3471:1994 |
| FOPS |
SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II |
SAE J231 JAN81, ISO 3449:1992 Level II |
| Travel Speed Forward |
12.7 km/h |
| Travel Speed Reverse |
12.7 km/h |
| Chain Box – Each Side |
6 l |
| Cooling System |
10 l |
| Engine Crankcase |
10 l |
| Fuel Tank |
58 l |
| Hydraulic System |
55 l |
| Hydraulic Tank |
35 l |
Reviews
There are no reviews yet.