| Engine Model |
Cat C3.3B DIT (turbo) |
| Net Power |
53.8 kW |
| Gross Power – SAE J1995 |
55.4 kW |
| Net Power – SAE 1349 |
53.8 kW |
| Displacement |
3.3 l |
| Bore |
94 mm |
| Stroke |
120 mm |
| Net Power SAE 1349† |
54.2 kW |
| Operating Weight – 320 mm/12.6 in Tracks |
4013 kg |
| Rated Operating Capacities – 50% Tipping Load |
1315 kg |
| Breakout Force – Tilt Cylinder |
2284 kg |
| Ground Contact Area – With 320 mm/12.6 in Track |
0.96 m² |
| Rated Operating Capacities – 35% Tipping Load |
921 kg |
| Rated Operating Capacity with Optional Counterweight |
1406 kg |
| Tipping Load |
2631 kg |
| Bucket Pin Height – Carry Position |
198 mm |
| Bucket Pin Height – Maximum Lift |
3075 mm |
| Clearance at Maximum Lift and Dump |
2283 mm |
| Departure Angle |
35° |
| Ground Clearance |
226 mm |
| Height – Top of Cab |
2111 mm |
| Length – Track on Ground |
1499 mm |
| Length – With Bucket on Ground |
3486 mm |
| Length – Without Bucket |
2767 mm |
| Maximum Dump Angle |
52° |
| Maximum Overall Height |
3915 mm |
| Maximum Reach – With Arms Parallel to Ground |
1305 mm |
| Overall Length – Track |
1999 mm |
| Rack Back Angle – Maximum Height |
87° |
| Reach – Maximum Lift/Dump |
608 mm |
| Turning Radius from Center – Bucket |
2184 mm |
| Turning Radius from Center – Coupler |
1392 mm |
| Turning Radius from Center – Machine Rear |
1561 mm |
| Vehicle Width (320 mm/12.6 in tracks) |
1676 mm |
| Vehicle Width (400 mm/15.7 in tracks) |
1755 mm |
| Hydraulic Flow – High Flow – Hydraulic Power (Calculated) |
43 kW |
| Hydraulic Flow – High Flow – Loader Hydraulic Flow |
112 l/min |
| Hydraulic Flow – High Flow – Loader Hydraulic Pressure |
23000 kPa |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) |
29 kW |
| Hydraulic Flow – Standard – Loader Hydraulic Flow |
76 l/min |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure |
23000 kPa |
| ROPS |
ISO 3471:2008 |
| FOPS |
ISO 3449:2005 Level I |
| FOPS Level II |
ISO 3449:2005 Level II |
| Travel Speed – Forward or Reverse – One Speed |
9.5 km/h |
| Travel Speed – Forward or Reverse – Two Speed |
13.7 km/h |
| Cooling System |
14 l |
| Engine Crankcase |
11 l |
| Fuel Tank |
105 l |
| Hydraulic System |
50 l |
| Hydraulic Tank |
39 l |
| Bucket Pin Reach – Maximum Lift |
238 mm |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Net Power – ISO 9249 |
54.3 kW |
| Net Power ISO 9249† |
54.8 kW |
| Note |
†Tier 4 Interim equivalent engine offered only for Australia/New Zealand, Macedonia, Ukraine and South Korea. |
| Peak Torque – 1,600 rpm – SAE J1995 |
265 N·m |
| Inside Cab** |
83 dB(A) |
| Note (1) |
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (2) |
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab*** |
103 dB(A) |
| Ground Contact Area – With 400 mm/15.7 in Track |
1.19 m² |
| Ground Pressure – With 320 mm/12.6 in Track |
41.1 kPa |
| Ground Pressure – With 400 mm/15.7 in Track |
33.4 kPa |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Rated Operating Capacities – 50% Tipping Load |
1315 kg |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Operating Weight – 400 mm/15.7 in Tracks |
4057 kg |
Reviews
There are no reviews yet.