| Engine Model |
Cat C3.3B DIT (turbo) |
| Net Power |
53.6 kW |
| Gross Power – SAE J1995 |
55.4 kW |
| Net Power – SAE 1349 |
53.6 kW |
| Displacement |
3.3 l |
| Bore |
94 mm |
| Stroke |
120 mm |
| Net Power SAE 1349† |
54 kW |
| Operating Weight |
4487 kg |
| Rated Operating Capacities – 50% Tipping Load |
1331 kg |
| Breakout Force – Tilt Cylinder |
3304 kg |
| Ground Contact Area – With 400 mm/15.7 in Track |
1.3 m² |
| Rated Operating Capacities – 35% Tipping Load |
932 kg |
| Rated Operating Capacity with Optional Counterweight |
1444 kg |
| Tipping Load |
2663 kg |
| Bucket Pin Height – Carry Position |
198 mm |
| Bucket Pin Height – Maximum Lift |
3173 mm |
| Clearance at Maximum Lift and Dump |
2485 mm |
| Departure Angle |
32° |
| Ground Clearance |
226 mm |
| Height – Top of Cab |
2113 mm |
| Length – Track on Ground |
1630 mm |
| Length – With Bucket on Ground |
3714 mm |
| Length – Without Bucket |
2995 mm |
| Maximum Dump Angle |
39° |
| Maximum Overall Height |
4051 mm |
| Maximum Reach – With Arms Parallel to Ground |
1373 mm |
| Overall Length – Track |
2129 mm |
| Reach – Maximum Lift/Dump |
575 mm |
| Turning Radius from Center – Bucket |
2256 mm |
| Turning Radius from Center – Coupler |
1410 mm |
| Turning Radius from Center – Machine Rear |
1796 mm |
| Vehicle Width (400 mm/15.7 in tracks) |
1931 mm |
| Vehicle Width (450 mm/17.7 in tracks) |
1981 mm |
| Hydraulic Flow – High Flow XPS – Hydraulic Power (Calculated) |
57 kW |
| Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Flow |
121 l/min |
| Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Pressure |
28000 kPa |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) |
33 kW |
| Hydraulic Flow – Standard – Loader Hydraulic Flow |
86 l/min |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure |
23000 kPa |
| ROPS |
ISO 3471:2008 |
| FOPS |
ISO 3449:2005 Level I |
| FOPS Level II |
ISO 3449:2005 Level II |
| Travel Speed – Forward or Reverse – One Speed |
7.2 km/h |
| Travel Speed – Forward or Reverse – Two Speed |
11.3 km/h |
| Cooling System |
14 l |
| Engine Crankcase |
11 l |
| Fuel Tank |
94 l |
| Hydraulic System |
52 l |
| Hydraulic Tank |
39 l |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Rack Back Angle – Maximum Height |
84° |
| Net Power – ISO 9249 |
54.1 kW |
| Net Power ISO 9249† |
54.6 kW |
| Note |
†Tier 4 Interim equivalent engine offered only for Australia/New Zealand, Macedonia, Ukraine and South Korea. |
| Peak Torque – 1,600 rpm – SAE J1995 |
265 N·m |
| Inside Cab** |
81 dB(A) |
| Note (1) |
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (2) |
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab*** |
103 dB(A) |
| Ground Contact Area – With 450 mm/17.7 in Track |
1.47 m² |
| Ground Pressure – With 400 mm/15.7 in Track |
33.9 kPa |
| Ground Pressure – With 450 mm/17.7 in Track |
30 kPa |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Rated Operating Capacities – 50% Tipping Load |
1331 kg |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Reviews
There are no reviews yet.