| Power – Net |
52.9 kW |
| Bore |
105 mm |
| Displacement |
4.4 l |
| Maximum Torque – 1,400 rpm |
288 N·m |
| Model |
3054C 56.5 kW Naturally Aspirated |
| Net Power – 2,200 rpm – 80/1269/EEC |
52.9 kW |
| Net Power – 2,200 rpm – ISO 9249 |
52.9 kW |
| Note |
*Meets Stage II/Tier 2 equivalent emission standards. |
| Rated Power (Standard) – 2,200 rpm – Gross – ISO 14396 |
56.5 kW |
| Stroke |
127 mm |
| Torque Rise – 1,400 rpm – Net |
27% |
| Operating Weight – Nominal |
7529 kg |
| Operating Weight – Maximum |
11000 kg |
| 4.3 m Extendible Stick – Excluding Front Counterweight |
203 kg |
| Air Conditioning |
40 kg |
| All-Wheel Drive |
147 kg |
| Cab – ROPS/FOPS |
157 kg |
| Counterweights – Base |
115 kg |
| MP Bucket (0.96 m3/1.25 yd3) – With Fold-Over Forks |
808 kg |
| MP Bucket (0.96 m3/1.25 yd3) – Without Fold-Over Forks |
605 kg |
| Operating Weight |
7529 kg |
| Operating Weight – Maximum – ROPS Capacity |
11000 kg |
| Ride Control |
11 kg |
| Maximum Pump Capacity |
132 l/min |
| System Pressure – Backhoe |
230 bar |
| System Pressure – Loader |
230 bar |
| Type |
Closed Center |
| Pump Type |
Variable-flow, Axial Piston |
| 2WD Cylinder, One (1) Double Acting – Bore |
65 mm |
| 2WD Cylinder, One (1) Double Acting – Rod Diameter |
36 mm |
| 2WD Cylinder, One (1) Double Acting – Stroke |
120 mm |
| AWD Cylinder, One (1) Double Acting – Bore |
65 mm |
| AWD Cylinder, One (1) Double Acting – Rod Diameter |
36 mm |
| AWD Cylinder, One (1) Double Acting – Stroke |
120 mm |
| Type |
Front Wheel |
| Power Steering |
Hydrostatic |
| Cooling System – A/C |
20 l |
| Engine Oil – With Filter |
9.1 l |
| Front Axle (AWD) |
11 l |
| Front Axle (AWD) – Planetaries |
0.7 l |
| Fuel Tank |
160 l |
| Hydraulic System |
95 l |
| Hydraulic Tank |
40 l |
| Rear Axle |
16.5 l |
| Rear Axle – Planetaries |
1.7 l |
| Transmission – Power Shuttle – 2WD |
15 l |
| Forward – 1st |
5.5 km/h |
| Forward – 2nd |
9 km/h |
| Forward – 3rd |
20.6 km/h |
| Forward – 4th |
40 km/h |
| Reverse – 1st |
5.5 km/h |
| Reverse – 2nd |
9 km/h |
| Reverse – 3rd |
20.6 km/h |
| Reverse – 4th |
40 km/h |
| Note |
Travel speeds of two wheel drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires. |
| Gross Power – ISO 14396 |
68.5 kW |
| Gross Power – ISO 14396 |
56.5 kW |
| Net Power – ISO 9249 |
52.9 kW |
| Features (1) |
Heavy-duty rear axle with self adjusting inboard brakes, differential lock and final drives. |
| Type |
Fully enclosed boosted, hydraulic, multiple discs. |
| Front Axle (2WD) – Dynamic |
9186 kg |
| Front Axle (2WD) – Static |
22964 kg |
| Front Axle (AWD) – Dynamic |
9186 kg |
| Front Axle (AWD) – Static |
22964 kg |
| Rear Axle – Dynamic |
9186 kg |
| Rear Axle – Static |
22964 kg |
| Features (2) |
AWD is engaged by front console panel switch or by brake pedal during all-wheel-braking operation. |
| Features (3) |
AWD can be engaged on the move, under load, in any gear, forward or reverse. |
| Features (4) |
AWD has outer final drives for easy maintenance. |
| Features (5) |
AWD front axle is pendulum mounted and permanently sealed and lubricated, requiring no daily maintenance. |
| Features (6) |
AWD also features double-acting steering cylinder with 52° steering angle for increased maneuverability. |
| Digging Depth – SAE Maximum – E-Stick Extended – 4.26 m |
5243 mm |
| Digging Depth – SAE Maximum – E-Stick Retracted – 4.26 m |
4244 mm |
| Digging Depth – SAE Maximum – Standard Stick |
4241 mm |
| Features (1) |
Inboard oil-immersed, hydraulically actuated multiple Kevlar discs on final drive input shaft. |
| Features (2) |
Completely enclosed and sealed. |
| Features (3) |
Self-adjusting. |
| Features (4) |
Dual foot-operated boosted brake pedals can be interlocked for roading. |
| Features (5) |
Parking/secondary brakes are independent of the service brake system. |
| Features (6) |
Parking brake is mechanically applied through a hand lever located in the right side console. |
| Features (7) |
Meets ISO 3450:1996 requirements. |
| Net Power – ISO 9249 |
64.9 kW |
| Bore |
105 mm |
| Displacement |
4.4 l |
| Maximum Torque – 1,400 rpm |
384 N·m |
| Model |
3054C 68.5 kW Mech Turbo |
| Net Power – 2,200 rpm – 80/1269/EEC |
65.4 kW |
| Net Power – 2,200 rpm – ISO 9249 |
65.4 kW |
| Note |
*Meets Stage II/Tier 2 equivalent emission standards. |
| Rated Power (Standard) – 2,200 rpm – Gross – ISO 14396 |
68.5 kW |
| Stroke |
127 mm |
| Torque Rise – 1,400 rpm – Net |
38% |
| Transmission – Power Shuttle – AWD |
15 l |
| 2WD Cylinder, One (1) Double Acting – Axle Oscillation |
11 mm |
| Turning Circle – 2WD/AWD (inner wheel not braked) – Outside Front Wheels |
8.2 m |
| Turning Circle – 2WD/AWD (inner wheel not braked) – Outside Widest Loader Bucket |
11 m |
| Counterweights – Maximum |
460 kg |
| Counterweights – Medium |
240 kg |
| Minimum Counterweight Recommendations – Extendible Stick: Loader Bucket – GP (2WD) |
460 kg |
| Minimum Counterweight Recommendations – Extendible Stick: Loader Bucket – GP (AWD) |
460 kg |
| Minimum Counterweight Recommendations – Extendible Stick: Loader Bucket – MP (2WD) |
115 kg |
| Minimum Counterweight Recommendations – Extendible Stick: Loader Bucket – MP (AWD) |
0 kg |
| Minimum Counterweight Recommendations – Standard Stick: Loader Bucket – GP (2WD) |
240 kg |
| Minimum Counterweight Recommendations – Standard Stick: Loader Bucket – GP (AWD) |
115 kg |
| Minimum Counterweight Recommendations – Standard Stick: Loader Bucket – MP (2WD) |
115 kg |
| Minimum Counterweight Recommendations – Standard Stick: Loader Bucket – MP (AWD) |
0 kg |
Reviews
There are no reviews yet.