| Standard Bucket Capacity |
Backhoe (heaped 1:1) 8.1 m3 (10.6 yd3) |
| Operating Weight |
140 tonnes (154 tons) |
| Engine Output – SAE J1995 |
606 kW (813 hp) |
| Alternator Rating |
150A (24V) |
| Batteries |
4 × 200Ah (12V each) |
| Components (1) |
Emergency stop in cabin, engine module, pump room and on service station accessible from ground level |
| Components (2) |
All around lighting |
| Components (3) |
Four (4) lights on attachment |
| Components (4) |
Five (5) lights for front |
| System Voltage |
24V |
| Components (1) |
Pressurized operator station with positive filtration |
| Components (10) |
Radio with MP3 auxiliary audio port |
| Components (11) |
Two stereo speakers |
| Components (12) |
Storage shelf suitable for lunch or toolbox |
| Components (13) |
Color LCD display with warning, filter/fluid change, and working hour information |
| Components (14) |
Adjustable armrest |
| Components (15) |
Height-adjustable joystick consoles |
| Components (16) |
Neutral lever (lock out) for all controls |
| Components (17) |
Travel control pedals with removable hand levers |
| Components (18) |
Two power outlets, 10 amp (total) |
| Components (19) |
Laminated glass front upper window and tempered other windows |
| Components (2) |
Mirror package |
| Components (3) |
Sliding upper door window (left-hand cab door) |
| Components (4) |
Glass-breaking safety hammer |
| Components (5) |
Removable lower windshield with in cab storage bracket |
| Components (6) |
Coat hook |
| Components (7) |
Beverage holder |
| Components (8) |
Literature holder |
| Components (9) |
AM/FM radio |
| Features (1) |
Closed-loop swing circuit with speed control |
| Features (2) |
Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking |
| Maximum Swing Speed |
4.9 r/min |
| Parking Brake |
Wet multiple disc brake, spring-loaded/hydraulically released |
| Swing Drive |
Two (2) compact planetary transmissions with axial piston motors |
| Swing Ring |
Cross roller bearing with sealed internal gearing |
| Components (1) |
Forged double-grouser track pads |
| Components (2) |
Chain links connected by hardened pins and bushings |
| Components (3) |
Cat D11 Track-Type Tractor links |
| Components (4) |
All running surfaces of sprockets, idlers, rollers and track chain links hardened |
| Components (5) |
Fully hydraulic self-adjusting track tensioning system with accumulator |
| Components (6) |
Automatic hydraulic retarder valve to prevent overspeed on downhill travel |
| Gradeability – Travel Drives |
Approximately 42% |
| Hydraulic Track Tensioning |
With accumulator |
| Maximum Drawbar Pull – Forward |
858 kN |
| Maximum Drawbar Pull – Reverse |
983 kN |
| Number of Carrier Rollers – Each Side |
3 |
| Number of Shoes – Each Side |
46 |
| Number of Track Rollers – Each Side |
9 |
| Travel Speed – Two Stages – 1st Stage – Maximum |
2.3 km/h |
| Travel Speed – Two Stages – 2nd Stage – Maximum |
3.3 km/h |
| Type (1) |
Central bank lubrication system |
| Type (2) |
Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing |
| Type (3) |
Standard grease reel on machine for bucket linkage |
| Buckets Equipped With |
– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds |
| Type (1) |
Boom and stick torsion-resistant with welded box design |
| Type (2) |
High-tensile steel with solid steel castings at pivot areas |
| Type (3) |
Boom and stick stress-relieved after welding |
| Type (4) |
Float valve for boom down function |
| Ground Pressure |
16.3 N/cm² |
| Note |
700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick |
| Operating Weight |
140 t |
| Equipped With (1) |
Emergency stop |
| Equipped With (2) |
Quick couplings for: – Diesel fuel – Grease |
| Feature |
Accessible from ground level |
| Capacity 1:1 |
8.1 m³ |
| Maximum Material Density – Loose |
1.8 t/m³ |
| Number of Teeth |
5 |
| Total Width |
2682 mm |
| Weight – Including Standard Wear Package |
7528 kg |
| Capacity – Grease Barrel |
68 l |
| Type (4) |
Grease refill service point accessible from ground |
| Tooth System |
Cat C70 penetration tip with CapSure lock |
| Bucket Digging Force – ISO |
586 kN |
| Bucket Digging Force – SAE |
501 kN |
| Stick Digging Force – ISO |
458 kN |
| Stick Digging Force – SAE |
439 kN |
| Maximum Digging Depth |
7.9 m |
| Maximum Digging Height |
13.2 m |
| Maximum Digging Reach |
13.9 m |
| Maximum Dump Height |
8.7 m |
| Standard Bucket Capacity – Backhoe (Heaped 1:1) |
8.1 m³ |
| Gradeability – Travel Drives |
Approximately 42% |
| Hydraulic Track Tensioning |
With accumulator |
| Maximum Drawbar Pull – Forward |
858 kN |
| Maximum Drawbar Pull – Reverse |
983 kN |
| Travel Speed – Two Stages – 1st Stage – Maximum |
2.3 km/h |
| Travel Speed – Two Stages – 2nd Stage – Maximum |
3.3 km/h |
| Components (5) |
Two (2) lights for left side |
| Components (6) |
One (1) light for right side |
| Components (7) |
Two (2) lights for rear end |
| Components (8) |
One (1) light for machine deck/service |
| Components (9) |
One (1) beacon light on cabin roof |
| Emissions |
U.S. EPA Tier 4 Final, Tier 2 Equivalent or Tier 1 Equivalent |
| Engine Model |
Cat® C27 ACERT™ |
| Gross Power – SAE J1995 |
606 kW |
| Net Power – SAE J1349 |
556 kW |
| Aspiration |
Turbocharged and aftercooled |
| Bore |
137.2 mm |
| Displacement |
27 l |
| Gross Power – SAE J1995 |
606 kW (813 hp 1,800 min-1) |
| Maximum Altitude – Without Deration – Above Sea Level |
4420 m |
| Net Power – SAE J1349 |
556 kW (746 hp 1,800 min-1) |
| Number of Cylinders |
12 |
| Stroke |
152.4 mm |
| Bore |
137.2 mm |
| Displacement |
27 l |
| Gross Power – SAE J1995 |
606 kW (813 hp 1,800 min-1) |
| Maximum Altitude – Without Deration – Above Sea Level |
3048 m |
| Net Power – SAE J1349 |
556 kW (746 hp 1,800 min-1) |
| Number of Cylinders |
12 |
| Stroke |
152.4 mm |
| Engine Fan Pump |
1 × variable swash plate pump |
| Engine Fan Pump – Maximum Flow, Engine Fan |
201 l/min |
| Engine Fan Pump – Maximum Pressure, Engine Fan |
220 bar |
| Filters (1) |
Full-flow high-pressure filters (200 μm) for main pumps |
| Filters (2) |
Full-flow filters (20 μm) for complete return circuit |
| Filters (3) |
Pressure filters (16 μm) for servo circuit |
| Filters (4) |
Full-flow filters (6 μm) for engine cooling return circuit |
| Filters (5) |
Swing charge filter (15 μm) |
| Filters (6) |
Pump case return screens (125 μm) |
| Hydraulic Fan Pump |
1 × variable swash plate pump |
| Hydraulic Fan Pump – Maximum Flow, Hydraulic Fan |
86 l/min |
| Hydraulic Fan Pump – Maximum Pressure, Hydraulic Fan |
135 bar |
| Hydraulic Oil Cooling – Diameter of Fan |
1016 mm |
| Hydraulic Oil Cooling – Maximum Flow |
1075 l/min |
| Main Pumps |
3 × variable swash plate pumps |
| Main Pumps – Maximum Pressure – Attachment |
320 bar |
| Main Pumps – Maximum Pressure – Travel |
320 bar |
| Main Pumps – Maximum Total Oil Flow |
1544 l/min |
| Pilot Pump |
1 × gear pump |
| Pilot Pump – Maximum Flow, Pilot |
153 l/min |
| Pilot Pump – Maximum Pressure, Pilot |
95 bar |
| Swing Pump |
1 × variable swash plate pump |
| Swing Pump – Maximum Flow – Swing |
479 l/min |
| Swing Pump – Maximum Pressure – Swing |
365 bar |
| Bucket Payload |
14.6 t |
| Operating Weight |
140 t |
| Cooling System |
165 l |
| Engine Oil |
87 l |
| Fuel Tank |
1700 l |
| Grease Tank |
68 l |
| Hydraulic System – Including Tank |
1752 l |
| Hydraulic Tank |
956 l |
| Swing Drive |
9 l |
| Features (3) |
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system |
| Extra Wide |
1000 mm |
| Number of Carrier Rollers – Each Side |
3 |
| Number of Shoes – Each Side |
46 |
| Number of Track Rollers – Each Side |
9 |
| Standard |
700 mm |
| Track Pads |
Double grouser |
| Wide |
900 mm |
| Components (7) |
Audible travel alarm |
Reviews
There are no reviews yet.