725C2

725C2

The Cat 725C2, with a 15 m3 (19.6 yd3) 24 tonnes (26.5 tons) capacity, offers proven reliability, durability, high productivity, superior operator comfort and lower operating costs. Updating the 725C to include all axle enclosed wet brakes and Automatic Traction Control makes the 725C2 the best option for our customers. Class leading levels of performance and operator comfort make for a productive machine all day long.

Description

Engine Model Cat C9.3 ACERT
Bore 115 mm
Stroke 149 mm
Displacement 9.3 l
Engine Model – U.S. EPA Tier 2/EU Stage II Equivalent Cat® C9.3 ACERT™
Gross Power – SAE J1995 239 kW
Net Power – ISO 14396 236 kW
Net Power – SAE J1349 234 kW
No Engine De-rating Below 2290 m
Peak Engine Torque Gross (SAE J1995) 1590 N·m
Peak Engine Torque Net (SAE J1349) 1573 N·m
Peak Engine Torque Speed 1200 r/min
Rated Payload 24 t
Heaped (SAE 2:1) 15 m³
Struck 11 m³
Tailgate Heaped SAE 2:1 15.6 m³
Tailgate Struck 11.1 m³
Forward – 1 8 km/h
Forward – 2 15 km/h
Forward – 3 22 km/h
Forward – 4 34 km/h
Forward – 5 47 km/h
Forward – 6 55 km/h
Reverse – 1 9 km/h
Interior Cab 76 dB(A)
Center Axle – Empty 4480 kg
Center Axle – Loaded 15230 kg
Center Axle – Rated Load 10750 kg
Front Axle – Empty 14065 kg
Front Axle – Loaded 16565 kg
Front Axle – Rated Load 2500 kg
Rear Axle – Empty 4230 kg
Rear Axle – Loaded 14980 kg
Rear Axle – Rated Load 10750 kg
Total – Empty 22775 kg
Total – Loaded 46775 kg
Total – Rated Load 24000 kg
Fuel Tank 412 l
Cooling System 83 l
Hydraulic System 110 l
Engine Crankcase 38 l
Transmission 47 l
Final Drives/Differential 125 l
Output Transfer Gear Box 24 l
Raise Time 10 s
Lower Time 8 s
Lock to Lock 4.75 seconds @ 60 rpm
Brakes ISO 3450 – 2011
Cab – FOPS ISO 3449 Level II – 2005
Cab – ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Type High strength Brinell HB450 wear resistant steel
Note Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions – Aisle Width 5332 mm
Turning Dimensions – Clearance Radius 8075 mm
Turning Dimensions – Inside Radius 3879 mm
Turning Dimensions – SAE Turning Radius 7470 mm
Turning Dimensions – Steer Angle – Left/Right 45°
Emissions The 725C2 meets Tier 2/Stage II equivalent emission standards.
Note (1) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3) Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Reviews

There are no reviews yet.

Be the first to review “725C2”

Your email address will not be published. Required fields are marked *