Engine Model |
Cat® C18 ACERT™ |
Bore |
145 mm |
Stroke |
183 mm |
Displacement |
18.1 l |
Engine Model – Equivalent to U.S. EPA Tier 2 and EU Stage II |
Cat C18 ACERT |
Gross Power – SAE J1995 |
381 kW |
Net Power – ISO 14396 |
376 kW |
Net Power – SAE J1349 |
370 kW |
Rated Payload |
41 t |
Heaped (SAE 2:1) |
25 m³ |
Struck |
18.5 m³ |
Tailgate Heaped SAE 2:1 |
26.5 m³ |
Tailgate Struck |
19.5 m³ |
Forward – 1 |
6.1 km/h |
Forward – 2 |
8.1 km/h |
Forward – 3 |
11.2 km/h |
Forward – 4 |
14.1 km/h |
Forward – 5 |
18.7 km/h |
Forward – 6 |
22.9 km/h |
Forward – 7 |
31.5 km/h |
Reverse – 1 |
6.4 km/h |
Reverse – 2 |
14.6 km/h |
Interior Cab |
72 dB(A) |
Center Axle – Empty |
7022 kg |
Center Axle – Loaded |
24572 kg |
Center Axle – Rated Load |
17550 kg |
Front Axle – Empty |
19161 kg |
Front Axle – Loaded |
25061 kg |
Front Axle – Rated Load |
5900 kg |
Rear Axle – Empty |
6760 kg |
Rear Axle – Loaded |
24310 kg |
Rear Axle – Rated Load |
17550 kg |
Total – Empty |
32943 kg |
Total – Loaded |
73943 kg |
Total – Rated Load |
41000 kg |
Type |
High Strength Brinell HB450 Wear Resistant Steel |
Fuel Tank |
550 l |
Cooling System |
90 l |
Engine Crankcase |
52 l |
DEF Tank |
25 l |
Steering/Hoist Hydraulic System |
140 l |
Transmission – OTG |
75 l |
Brake Cooling Tank |
67 l |
Raise (automatic) |
13 s |
Raise (manual) |
12 s |
Lock to Lock |
4.8 seconds @ 60 rpm |
Brakes |
ISO 3450 – 2011 |
Cab – FOPS |
ISO 3449 Level II |
Cab – ROPS |
ISO 3471 – 2008 |
Steering |
ISO 5010 – 2007 |
Note |
Dimensions are for machines equipped with 29.5R25 tires. |
Turning Dimensions – Aisle Width |
5917 mm |
Turning Dimensions – Clearance Radius |
9082 mm |
Turning Dimensions – Inside Radius |
4413 mm |
Turning Dimensions – SAE Turning Radius |
8625 mm |
Turning Dimensions – Steer Angle – Left/Right |
45° |
Forward – 8 |
37.9 km/h |
Lower (automatic) |
10 s |
Lower (manual) |
10 s |
Base |
14 mm |
Chute |
14 mm |
Front |
7 mm |
Side |
11 mm |
Emissions |
Equivalent to Tier 2/Stage II. |
No Engine De-rating Required Below |
3050 m |
Note (1) |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Note (3) |
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. |
Peak Engine Torque Gross (SAE J1995) |
2618 N·m |
Peak Engine Torque Net (SAE J1349) |
2558 N·m |
Peak Engine Torque Speed |
1200 r/min |
Hydraulic Excavator: 374 – Passes |
5 |
Hydraulic Excavator: 390 – Passes |
4 |
Note |
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
Wheel Loader: 972 – Passes |
4-5 |
Wheel Loader: 980 – Passes |
4-5 |
Wheel Loader: 982 – Passes |
4 |
Axles – Each |
60 l |
Final Drive – Each |
5 l |
Note (1) |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
Note (2) |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Forward – 9 |
54.8 km/h |
Reviews
There are no reviews yet.