| Dipper Payload |
109 t |
| Dipper Capacity |
30.6-62.7 m3 (40-82 yd3) |
| Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) |
109 t |
| Note |
Dependent on application and material density |
| Ballast – Furnished By Customer |
302614 kg |
| Note (1) |
These weights will vary slightly depending upon dipper and optional equipment selection |
| Note (2) |
All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads |
| Working Weight – With Dipper and Standard Links |
1386178 kg |
| Crawler Dimensions – Overall Width 200.7 cm (79 in) Treads, Standard |
11 m |
| Crawler Dimensions – Overall Width 259.1 cm (102 in) Treads |
11.6 m |
| Ground Bearing Pressure – Note |
Ground bearing pressure is dependent upon many factors |
| Ground Bearing Pressure – Total Effective Bearing Area (200.7 cm) Treads |
36 m2 (380 kPa); 386 ft2 (55 psi) |
| Ground Bearing Pressure – Total Effective Bearing Area (259.1 cm) Treads |
47 m2 (297 kPa); 501 ft2 (43 psi) |
| Hoist |
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
| Planetary Propel |
Dual-motor independent drive |
| Swing |
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
| Upper Works Overall Width – Including Standard Walkways |
12.8 m |
| Components (1) |
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room |
| Type |
Automatic, single-line system for open gear lubricant and grease |
| Drive |
IGBT Acutrol drive system |
| Power Requirements – 50 Hz |
6,000V, 6,600V, 7,200V, 11,000V |
| Power Requirements – 60 Hz |
7,200V, 13,800V |
| Power Requirements – Average Power Demand |
934-1308 kW |
| Power Requirements – Note |
Other voltage options available to suit customer requirements |
| Power Requirements – Peak power |
3737 kW |
| Power Requirements – Voltage |
3 phase, 50/60 Hz, 7,200V |
| System Voltage – Nominal |
50/60 Hz, 7,200V |
| Crowd (1) |
Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
| Crowd (2) |
(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. |
| Rope Data – Boom Suspension – Diameter |
83 mm |
| Rope Data – Boom Suspension – No. |
4 |
| Rope Data – Crowd – Diameter |
64 mm |
| Rope Data – Crowd – No. |
1 |
| Rope Data – Dipper Trip – Diameter |
19 mm |
| Rope Data – Dipper Trip – No. |
1 |
| Rope Data – Hoist – Diameter |
70 mm |
| Rope Data – Hoist – No. |
2 |
| Rope Data – Note |
High impact ropes available as an option |
| Rope Data – Retract – Diameter |
64 mm |
| Rope Data – Retract – No. |
1 |
| Type |
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
| Dipper Capacities |
30.6-62.7 m3 (40-82 yd3) |
| Dipper Payload |
109 t |
| Maximum Dumping Height |
8.8 m |
| Operating Weight |
1386178 kg |
| Cutting Height – Maximum |
16.3 m |
| Cutting Radius – Maximum |
24.4 m |
| Dumping Height – With Clearance to Open Dipper Door |
8.8 m |
| Note (1) |
Optimal working ranges based on loading a Cat 797F truck. |
| Note (2) |
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads. |
| Radius of Level Floor |
17.1 m |
| Revolving Frame Tail Swing Radius |
9.3 m |
| Components (2) |
External FastFil from lower level |
Reviews
There are no reviews yet.