777E

777E

Description

GCI

Engine Model Cat C32 ACERT
Bore 145 mm
Stroke 162 mm
Displacement 32.1 l
Cylinders 12
Engine Power – ISO 14396 749 kW
Engine Speed 1750 r/min
Gross Power – SAE J1995 758 kW
Net Power – SAE J1349 708 kW
Net Torque – 1,300 rpm 4757 N·m
Net Torque Rise 23%
Note (1) Power rating applies at 1,750 rpm when tested under the specified condition for the specified standard.
Note (2) Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Nominal Payload Class (100%) 92.6 ton (US)
Top Speed – Loaded 65.9 km/h
Forward – 1 10.7 km/h
Forward – 3 19.8 km/h
Forward – 5 36.2 km/h
Forward – 7 65.9 km/h
Note Maximum travel speeds with standard 27.00R49 (E4) tires.
Reverse – 1 12.1 km/h
Differential Ratio 2.74:1
Planetary Ratio 7.00:1
Total Reduction Ratio 19.16:1
Brake Standards ISO 3450:2011
Brake Surface Area – Front Caliper 2787 cm²
Brake Surface Area – Front OCDB 40846 cm²
Body Raise Time – High Idle 15 s
Pump Flow – High Idle 491 l/min
Heaped 2:1 (SAE) 60.1 m³
Struck 42.1 m³
Front Axle – Empty/Loaded 44%/30%
Rear Axle – Empty/Loaded 56%/70%
Effective Cylinder Stroke – Front 318 mm
Effective Cylinder Stroke – Rear 165 mm
Rear axle – Oscillation 5.4°
Fuel Tank 1140 l
Cooling System 212 l
Crankcase 113.5 l
Differentials 222 l
Final Drive – Each 42 l
Steering System – Includes Tank 59 l
Torque Converter – Brake – Hoist Hydraulic Tank 385 l
Transmission System 122 l
Standard Tire 27.00R49 (E4)
ROPS ROPS (Rollover Protective Structure) cab offered by Caterpillar meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
Sound Standards ISO 6393:2008, SAE J1166:2008
Steer Angle 30.5°
Steering Standards ISO 5010:2007
Turning Diameter – Front 25.3 m
Turning Circle – Clearance Diameter 28.4 m
Heaped 2:1 (SAE) 64.1 m³
Struck 43.1 m³
Brake Surface Area – Rear 102116 cm²
Centerline Front Tire Width 4163 mm
Centerline of Rear Dual Tire Width 3576 mm
Dump Clearance 890 mm
Engine Guard Clearance 864 mm
Front Canopy Height – Loaded 5177 mm
Ground Clearance 896 mm
Height – Top of ROPS – Loaded 4730 mm
Inside Body Depth – Maximum 1895 mm
Inside Body Length 6920 mm
Inside Body Width 5200 mm
Loading Height – Empty 4380 mm
Operating Width 6105 mm
Operating Width – Extended Catwalk 6545 mm
Outside Body Width 5524 mm
Overall Body Length 9555 mm
Overall Canopy Width 6200 mm
Overall Front Tire Width 4961 mm
Overall Height – Body Raised 9953 mm
Overall Length 10004 mm
Overall Tire Width 5262 mm
Rear Axle – Clearance 902 mm
Rear Axle – Tail 3045 mm
Wheel Base 4570 mm
Centerline Front Tire Width 4163 mm
Centerline of Rear Dual Tire Width 3576 mm
Dump Clearance 818 mm
Engine Guard Clearance 864 mm
Front Canopy Height – Loaded 5370 mm
Ground Clearance 896 mm
Height – Top of ROPS – Loaded 4730 mm
Inside Body Depth – Maximum 1777 mm
Inside Body Length 7186 mm
Inside Body Width 5450 mm
Loading Height – Empty 4430 mm
Operating Width 6105 mm
Operating Width – Extended Catwalk 6545 mm
Outside Body Width 5689 mm
Overall Body Length 10070 mm
Overall Canopy Width 6200 mm
Overall Front Tire Width 4961 mm
Overall Height – Body Raised 10071 mm
Overall Length 10230 mm
Overall Tire Width 5262 mm
Rear Axle – Clearance 902 mm
Rear Axle – Tail 3263 mm
Wheel Base 4570 mm
Emissions (1) Meets U.S. EPA Tier 2 Equivalent emission standards.
Emissions (2) Certified for China Nonroad Stage III emission standards.
Note (3) No engine derating required up to 3048 m (10,000 ft) altitude.
Maximum Payload Class (110%) 98.2 ton (US)
FOPS FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II FOPS criteria for Trainer.
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to work cycle procedures specified in SAE J1166:2008 is 80 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
Note (2) The dynamic operator sound pressure level is 80 dB(A) as per ISO 6396:2008 for cab offered by Caterpillar. When properly installed and maintained and tested with doors and windows closed.
Note Separate hydraulic system prevents cross-contamination.
Note (1) Productive capabilities of the 777E truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2) Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Body System Weight 16070 kg
Empty Operating Weight 70753 kg
Target Gross Machine Weight 163360 kg
Target Payload 92607 kg
Body System Weight 16070 kg
Empty Operating Weight 65158 kg
Target Gross Machine Weight 163360 kg
Target Payload 98202 kg
Body System Weight 15900 kg
Empty Operating Weight 69674 kg
Target Gross Machine Weight 163360 kg
Target Payload 93686 kg
Body System Weight 15900 kg
Empty Operating Weight 64988 kg
Target Gross Machine Weight 163360 kg
Target Payload 98372 kg

Reviews

There are no reviews yet.

Be the first to review “777E”

Your email address will not be published. Required fields are marked *