| Net Power |
72 kW |
| Engine Model |
Cat C4.4 |
| Maximum Gross Power – ISO 14396 |
74 kW |
| Maximum Gross Power – ISO 14396 (DIN) |
74 kW |
| Maximum Gross Power – Maximum Engine Speed |
2350 r/min |
| Maximum Gross Power – SAE J1995 |
76 kW |
| Rated Net Power – Rated Engine Speed |
2200 r/min |
| Rated Net Power – SAE J1349 |
72 kW |
| Operating Weight |
8488 kg |
| Cooling System |
21.5 l |
| Fuel Tank |
154 l |
| Engine Crankcase |
8.8 l |
| Hydraulic System – Including Tank |
98 l |
| Rated Bucket Capacity |
1.9 m³ |
| Maximum Gross Power |
74 kW |
| Bucket Capacities |
1.3-1.9 m3 (1.7-2.5 yd3) |
| ROPS |
ISO 3471:2008 |
| FOPS |
ISO 3449:2005 Level II |
| Front |
Fixed; Locking differential (standard) |
| Rear |
Oscillating �11 degrees; Locking differential (Standard) |
| Note (1) |
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) |
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
| Note (3) |
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
| Note (4) |
*The measurements were conducted with the cab doors and windows closed. |
| Bore |
105 mm |
| Displacement |
4.4 l |
| Emissions |
Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards. |
| Maximum Gross Torque – ISO 14396 |
450 N·m |
| Maximum Gross Torque – SAE J1995 |
455 N·m |
| Maximum Net Torque – ISO 9249 |
446 N·m |
| Maximum Net Torque – SAE J1349 |
441 N·m |
| Note |
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Rated Net Power – ISO 9249 |
72 kW |
| Rated Net Power – ISO 9249 (DIN) |
72 kW |
| Stroke |
127 mm |
| Hydraulic Cycle Time – Dump, at Maximum Reach |
1.4 s |
| Hydraulic Cycle Time – Float Down, Maximum Lift to Ground Level |
3.7 s |
| Hydraulic Cycle Time – Rackback |
2.2 s |
| Hydraulic Cycle Time – Raise, Ground Level to Maximum Lift |
5.2 s |
| Hydraulic Cycle Time – Total Cycle Time |
12.5 s |
| Maximum Flow – Implement Pump |
148 l/min |
| Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, High |
120 l/min |
| Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, Standard |
90 l/min |
| Maximum Flow – Implement Pump – 4th Function, Maximum Flow |
90 l/min |
| Maximum Working Pressure – Implement Pump |
28000 kPa |
| Relief Pressure – Tilt Cylinder |
34000 kPa |
| Relief Pressure – Tilt Cylinder – 3rd Function Maximum Working Pressure |
21000 kPa |
| Relief Pressure – Tilt Cylinder – 4th Function Maximum Working Pressure |
21000 kPa |
| Axles – Front Center Differential |
7.5 l |
| Axles – Rear Center Differential |
7.5 l |
| Hydraulic Tank |
55 l |
| Transmission |
3.4 l |
| Maximum Flow – Steering Pump |
82 l/min |
| Maximum Working Pressure – Steering Pump |
22500 kPa |
| Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left |
3.75 turns |
| Steering Articulation Angle – Each Direction |
40 ° |
| Steering Cycle Times – Full Left to Full Right – At 2,350 rpm: 90 rpm Steering Wheel Speed |
2.8 s |
| Note (1) |
Other tire choices are available. Contact your Cat dealer for details. |
| Note (2) |
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| Note (3) |
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Other Choices Include |
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport� |
| Standard Size |
17.5-25 12PR |
| Forward and Reverse – Low Range, Speed Range 1* |
10 km/h |
| Forward and Reverse – Low Range, Speed Range 2* |
20 km/h |
| Note |
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
Reviews
There are no reviews yet.