| Flywheel Power |
144 kW |
| Engine Model |
Cat C7.1 ACERT |
| Net Power – ISO 9249/SAE J1349 |
144 kW |
| Net Power – ISO 9249/SAE J1349 (DIN) |
144 kW |
| Track on Ground |
2542 mm |
| Track Gauge |
1850 mm |
| Ground Contact Area – Optional Shoe |
2.6 m² |
| Ground Contact Area – Standard Shoe |
3.2 m² |
| Ground Pressure – Optional Shoe |
75.8 kPa |
| Ground Pressure – Standard Shoe |
62 kPa |
| Ground Pressure(1) – Optional Shoe |
76.9 kPa |
| Ground Pressure(1) – Standard Shoe |
62.9 kPa |
| Grouser Height – Double Grouser |
42 mm |
| Track Rollers/Shoes – Each Side |
Jul-38 |
| Track Shoe Width – Optional |
450 mm |
| Track Shoe Width – Standard |
550 mm |
| Fuel Tank |
320 l |
| Operating Weight |
20021 kg |
| Capacity – General Purpose |
2.5 m³ |
| Capacity – Multi-Purpose |
2 m³ |
| Capacity – Performance Series |
2.8 m³ |
| Width – General Purpose |
2612 mm |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes. |
| Width – Multi-Purpose |
2575 mm |
| Width – Performance Series |
2712 mm |
| Bucket Height – Carry Position |
457 mm |
| Carry Position Approach Angle |
15° |
| Clearance at Full Lift Height and 45° Dump* |
2915 mm |
| Digging Depth* |
138 mm |
| Grading Angle |
63° |
| Ground Clearance |
471 mm |
| Height – Bucket Hinge Pin |
3940 mm |
| Height – Top of Stack |
2940 mm |
| Machine Height – Top of Cab |
3325 mm |
| Maximum Rollback – Ground/Carry Position |
43°/50° |
| Maximum Rollback/Dump – Fully Raised |
52°/53° |
| Note |
*With General Purpose bucket and extra duty teeth. |
| Overall Machine Height – Bucket Fully Raised |
5402 mm |
| Overall Machine Length* |
7001 mm |
| Overall Machine Width without Bucket: With Standard Tracks – 550 mm (21.6 in) Shoes |
2400 mm |
| Ramp Angle |
29° |
| Reach at Full Lift Height and 45° Dump* |
1373 mm |
| Emissions |
U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA |
| Note (1) |
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
| Note (2) |
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| DEF Tank(1) |
16 l |
| Note |
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
| Note |
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
| Note |
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
| Operating Weight(1) |
20308 kg |
Reviews
There are no reviews yet.