980L

980L

Description

Net Power – ISO 9249 278 kW
Engine Model Cat C13 ACERT
Maximum Power – 1,800 rpm – ISO 14396 – Metric 303 kW
Maximum Net Power – 1,800 rpm – ISO 9249 – Metric 278 kW
Cooling System 45 l
Crankcase 37 l
Transmission 77 l
Hydraulic Tank 153 l
Differential – Final Drives – Front 84 l
Differential – Final Drives – Rear 84 l
Note (1) *Distance of 15 m, moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value – Operator Sound Pressure Level (ISO 6396:2008)** 72 dB(A)
Operating Weight 30090 kg
Bucket Capacities 4.2-12.2 m? (5.5-16.0 yd3)
Forward – 1 6.9 km/h
Forward – 2 13.3 km/h
Forward – 3 23.5 km/h
Forward – 4 39.5 km/h
Breakout Force 224 kN
Static Tipping Load – Full 37° Turn – No Tire Deflection 20796 kg
Static Tipping Load – Full 37° Turn – With Tire Deflection 19565 kg
Note (2) **For machines in countries that adopt the ?EU Directives.?
With Cooling Fan Speed at 70% of Maximum Value – Exterior Sound Power Level (ISO 6395:2008)** 109 LWA***
With Cooling Fan Speed at Maximum Speed – Operator Sound Pressure Level (ISO 6396:2008) 75 dB(A)
Reverse – 1 7.8 km/h
Reverse – 2 15.2 km/h
Reverse – 3 26.9 km/h
Implement Pump Type Variable Displacement Piston
Implement System – Maximum Operating Pressure 34300 kPa
Implement System – Maximum Pump Output at 2,250 rpm 449 l/min
Fuel Tank 426 l
Displacement 12.5 l
Reverse – 4 39.5 km/h
Bucket Range 4.2-12.2 m³ (5.5-16.0 yd³)
Centerline of Rear Axle to Edge of Counterweight 2608 mm
Centerline of Rear Axle to Hitch 1900 mm
Ground Clearance 453 mm
Height – Top of Exhaust Pipe 3746 mm
Height – Top of Hood 3110 mm
Height – Top of ROPS 3813 mm
Hinge Pin Height at Carry 678 mm
Hinge Pin Height at Maximum Lift 4760 mm
Lift Arm Clearance at Maximum Lift 4010 mm
Maximum Width over Tires 3296 mm
Note All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Overall Length – Without Bucket 8302 mm
Rack Back – Carry Height 48 degrees
Rack Back – Maximum Lift 61 degrees
Rack Back at Ground 39 degrees
Tread Width 2440 mm
Wheel Base 3800 mm
Centerline of Rear Axle to Edge of Counterweight 2608 mm
Centerline of Rear Axle to Hitch 1900 mm
Ground Clearance 453 mm
Height – Top of Exhaust Pipe 3746 mm
Height – Top of Hood 3110 mm
Height – Top of ROPS 3813 mm
Hinge Pin Height at Carry 621 mm
Hinge Pin Height at Maximum Lift 4539 mm
Lift Arm Clearance at Maximum Lift 3795 mm
Maximum Width over Tires 3296 mm
Note All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Overall Length – Without Bucket 8214 mm
Rack Back – Carry Height 48 degrees
Rack Back – Maximum Lift 61 degrees
Rack Back at Ground 40 degrees
Tread Width 2440 mm
Wheel Base 3800 mm
Maximum Net Torque – 1,000 rpm 2040 N·m
Peak Gross Torque – 1,300 rpm – ISO 14396 2172 N·m
Hydraulic Cycle Time – Total 10.1 s
Note (1) For a machine configuration as defined under ?Weight.?
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Note (3) ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at Maximum Speed – Exterior Sound Power Level (ISO 6395:2008) 112 dB(A)
With Cooling Fan Speed at Maximum Speed – Exterior Sound Pressure Level (SAE J88:2013) 78 dB(A)*
Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm roll radius.
Note Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m? general purpose bucket with BOCE.

Reviews

There are no reviews yet.

Be the first to review “980L”

Your email address will not be published. Required fields are marked *