Net Power |
373 kW |
Engine Model |
Cat® C18 ACERT® |
Gross Power |
414 kW |
Net Power – ISO 9249 |
373 kW |
Gross Power – ISO 3046-2 |
388 kW |
Bore |
145 mm |
Stroke |
183 mm |
Displacement |
18.1 l |
Net Power – EEC 80/1269 |
373 kW |
Net Power – ISO 14396 |
397 kW |
Operating Weight |
50144 kg |
Rated Payload |
11.4 t |
Converter Drive – Forward 1 |
6.7 km/h |
Converter Drive – Forward 2 |
11.8 km/h |
Converter Drive – Forward 3 |
20.8 km/h |
Converter Drive – Forward 4 |
36 km/h |
Converter Drive – Reverse 1 |
7.6 km/h |
Converter Drive – Reverse 2 |
13.5 km/h |
Converter Drive – Reverse 3 |
23.7 km/h |
Direct Drive – Forward 1 |
Lock-up disables |
Direct Drive – Forward 2 |
12.3 km/h |
Direct Drive – Forward 3 |
21.9 km/h |
Direct Drive – Forward 4 |
38.6 km/h |
Direct Drive – Reverse 1 |
7.9 km/h |
Direct Drive – Reverse 2 |
14.1 km/h |
Direct Drive – Reverse 3 |
25.1 km/h |
Dump |
2.4 s |
Lower Float Down – Empty |
3.8 s |
Raise |
9.4 s |
Total Hydraulic Cycle Time |
15.6 s |
Fuel Tank |
712 l |
Cooling System |
103 l |
Crankcase |
60 l |
Transmission |
70 l |
Differential – Final Drives – Front |
186 l |
Differential – Final Drives – Rear |
186 l |
Hydraulic System Factory Fill |
470 l |
Hydraulic System – Tank Only |
267 l |
Centerline of Rear Axle to Edge of Rear Bumper |
3132 mm |
Wheel Base Length |
4550 mm |
Height – Top of Exhaust Stack |
4112 mm |
Height – Top of Hood |
3156 mm |
Ground Clearance |
549 mm |
Height – Top of Cab |
4128 mm |
Height – Top of Air Cleaner |
3382 mm |
Centerline of Front Axle to Hitch |
2275 mm |
C-Pin Height |
1009 mm |
Dig Depth |
226 mm |
Rack Back Angle – Ground |
47.8 ° |
Rack Back Angle – Carry |
56.5 ° |
Clearance at Maximum Lift and Dump |
3879 mm |
Height – Spillguard |
5432 mm |
B-Pin Height |
5853 mm |
Rack Back Angle – Maximum Lift |
45 ° |
Bucket Capacities |
6.4 m3-7.7 m3 8.3 yd3-10 yd3 |
Maximum Bucket Capacity |
7.7 m³ |
Maximum Single-Wheel Rise and Fall |
568 mm |
Front |
Fixed |
Rear |
Oscillating ±13° |
Brakes |
Meet SAE ISO 3450:1996 |
Cab – ROPS/FOPS |
Meets SAE and ISO standards |
Sound Performance |
Meets ANSI, SAE and ISO standards |
Steering |
Meets SAE and ISO standards |
Total Steering Angle |
86 ° |
Cylinders, Double Acting – Lift, Bore and Stroke |
220 × 911 mm 8.7 × 35.9 in |
Cylinders, Double Acting – Tilt, Bore and Stroke |
220 × 1770 mm 8.7 × 69.7 |
Main Hydraulic System Output at 2010 rpm and 6900 kPa (1000 psi) |
492 l/min |
Pilot System – Gear-Type Pump Output at 2,010 rpm and 2500 kPa (363 psi) |
76 l/min |
Relief Valve Setting |
35000 kPa |
Relief Valve Setting – Low Idle |
2400 kPa |
Reviews
There are no reviews yet.