| Net Power |
1297 kW |
| Engine Model |
Cat® 3516E |
| Bore |
170 mm |
| Stroke |
215 mm |
| Displacement |
78.1 l |
| Rated Speed |
1,600 rpm |
| Emissions |
U.S. EPA Tier 4 Final/EU Stage IV* or U.S. EPA Tier 1/EU Stage I Equivalent |
| Gross Power – ISO 14396 |
1377 kW |
| Gross Power – SAE J1995 |
1394 kW |
| Net Power – SAE J1349 – Standard Ambient |
1297 kW |
| Peak Torque – 1,200 rpm – SAE J1995 |
11591 N·m |
| Torque Rise |
39% |
| Operating Weight |
242605 kg |
| Bucket Capacity Range |
19.1-24.5 m3 (25-32 yd3) |
| Rated Payload – High Lift |
38.1 t |
| Rated Payload – Standard |
40.8 t |
| Transmission Type |
Cat Planetary Power Shift |
| Forward – 1 |
7.4 km/h |
| Forward – 2 |
12.9 km/h |
| Forward – 3 |
21.9 km/h |
| Reverse – 1 |
8.1 km/h |
| Reverse – 2 |
14.1 km/h |
| Reverse – 3 |
24 km/h |
| Direct Drive – Forward 1 |
Lock-up disables |
| Direct Drive – Forward 2 |
14 km/h |
| Direct Drive – Forward 3 |
24.5 km/h |
| Direct Drive – Reverse 1 |
Lock-up disables |
| Direct Drive – Reverse 2 |
15.5 km/h |
| Direct Drive – Reverse 3 |
27 km/h |
| Cylinders, Double Acting – Lift, Bore and Stroke |
370 × 1713 mm (14.6 × 67.4 in) |
| Cylinders, Double Acting – Tilt, Bore and Stroke |
310 × 1086 mm (12.2 × 42.8 in) |
| Lift/Tilt System – Circuit |
Positive Flow Control |
| Lift/Tilt System – Pump |
Variable Displacement Piston |
| Maximum Flow at 1,700 rpm Engine Speed |
2047 l/min |
| Pilot System |
Open Loop and Pressure Reducing |
| Relief Valve Setting – Lift/Tilt |
32500 kPa |
| Raise |
12.6 s |
| Dump |
3.1 s |
| Lower Float Down |
4.2 s |
| Rack Back |
4.9 s |
| Cooling System |
520 l |
| Differential – Final Drives – Front |
833 l |
| Differential – Final Drives – Rear |
757 l |
| Engine Crankcase |
288 l |
| Fuel Tank – Standard |
3445 l |
| Fuel Tank – With 24 hr Attachment |
5678 l |
| Hydraulic Tank – Implement and Hydraulic Fan |
1022 l |
| Hydraulic Tank – Steering and Braking |
379 l |
| Transmission |
416 l |
| Bucket Capacities |
19.1-24.5 m3 (25-32 yd3) |
| Front |
Fixed |
| Rear |
Trunnion |
| Oscillation Angle |
9° |
| Brakes |
ISO 3450:2011 |
| Machine Sound Level (ISO 6395:2008) |
119 dB(A) |
| Operator Sound Level (ISO 6396:2008) – Tier 1/EU Stage I Equivalent |
72 dB(A) |
| Operator Sound Level (ISO 6396:2008) – Tier 4 Final/EU Stage IV* |
72 dB(A) |
| Maximum Flow at 1,700 rpm Engine Speed |
980 l/min |
| Relief Valve Setting – Steering |
31000 kPa |
| Steering System – Circuit |
Pilot, Load Sensing |
| Steering System – Pump |
Piston, Variable Displacement |
| Total Steering Angle |
80 degrees |
| Diesel Exhaust Fluid (DEF) (Tier 4 Final/Stage IV) |
519 l |
| Note |
*Not available on Tier 4 Final machines. Not available in all regions. |
| Oil Renewal System (ORS)* |
75.7 l |
| Ambient Capability Hydraulically Driven Demand Fan – High (Tier 1 equivalent) |
55 °C |
| Ambient Capability Hydraulically Driven Demand Fan – High (Tier 4 Final) |
53 °C |
| Ambient Capability Hydraulically Driven Demand Fan – Standard |
43 °C |
| B-Pin Height – Maximum Lift |
9647 mm |
| Clearance at Maximum Lift |
7095 mm |
| Dump Angle at Maximum Lift |
–50.0 degrees |
| Front Axle Centerline to Bucket Tip |
7097 mm |
| Ground to Bumper Clearance |
1355 mm |
| Ground to Center of Axles |
1820 mm |
| Ground to Lower Hitch Clearance |
898 mm |
| Ground to Top of Exhaust Stacks |
7067 mm |
| Ground to Top of Hood |
5682 mm |
| Ground to Top of ROPS |
7118.5 mm |
| Maximum Overall Height – Bucket Raised |
12545 mm |
| Maximum Overall Length |
20102 mm |
| Note |
Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57. |
| Rack Angle at Maximum Lift |
59.4 degrees |
| Rack Back Angle – Carry |
53.7 degrees |
| Rack Back Angle – Ground Level |
45.0 degrees |
| Reach – Maximum Lift |
2688 mm |
| Rear Axle – Centerline to Bumper |
6205 mm |
| Tread Width |
4300 mm |
| Wheel Base |
6800 mm |
| Width – Over Tires – With Bulge |
5760 mm |
| B-Pin Height – Maximum Lift |
8790 mm |
| Clearance at Maximum Lift |
6167 mm |
| Dump Angle at Maximum Lift |
–50.0 degrees |
| Front Axle Centerline to Bucket Tip |
6503 mm |
| Ground to Bumper Clearance |
1355 mm |
| Ground to Center of Axles |
1820 mm |
| Ground to Lower Hitch Clearance |
898 mm |
| Ground to Top of Exhaust Stacks |
7067 mm |
| Ground to Top of Hood |
5682 mm |
| Ground to Top of ROPS |
7118.5 mm |
| Maximum Overall Height – Bucket Raised |
11771 mm |
| Maximum Overall Length |
19508 mm |
| Note |
Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57. |
| Rack Angle at Maximum Lift |
59.5 degrees |
| Rack Back Angle – Carry |
47.7 degrees |
| Rack Back Angle – Ground Level |
39.7 degrees |
| Reach – Maximum Lift |
2821 mm |
| Rear Axle – Centerline to Bumper |
6205 mm |
| Tread Width |
4300 mm |
| Wheel Base |
6800 mm |
| Width – Over Tires – With Bulge |
5758 mm |
| Net Power – SAE J1349 – High Ambient |
1265 kW |
| Note (1) |
The power ratings apply when tested under the reference conditions for the specified standard. |
| Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and muffler. |
| Note (3) |
The gross power advertised is with the fan at maximum speed. |
| Note (4) |
*Tier 4 Final/EU Stage IV configuration is ready to meet Stage V emission requirements once in effect. |
| Total Hydraulic Cycle Time – Empty Bucket |
23.5 s |
| Steering Cycle Times – High Idle |
4.3 s |
| Steering Cycle Times – Low Idle |
7.6 s |
| Bucket Capacity Range – Coal |
32.1-43.6 m3 (42-57 yd3) |
| Bucket Capacity Range – Iron Ore |
17.2 m³ |
| Bucket Capacity Range – Rock |
19.1-24.5 m3 (25-32 yd3) |
| Note |
*EU Stage V ready. |
| Sound Performance |
The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Machine Sound Level (ISO 6395:2008) |
117 dB(A) |
| Note |
*EU Stage V ready. |
| Operator Sound Level (ISO 6396:2008) – Tier 1/EU Stage I Equivalent |
71 dB(A) |
| Operator Sound Level (ISO 6396:2008) – Tier 4 Final/EU Stage IV* |
71 dB(A) |
| Sound Performance |
The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Note |
Travel speeds based on 58/85-57 tires. |
Reviews
There are no reviews yet.