| Engine Model |
Cat® C27 ACERT™ |
| Flywheel Power |
447 kW |
| Bore |
137 mm |
| Stroke |
152 mm |
| Displacement |
27 l |
| Engine Power – Gross SAE J1995* (FWD/REV) |
470/571 kW (630/766 hp) |
| Engine Power – ISO 14396 (FWD/REV) |
462/562 kW (620/754 hp) |
| Engine Power – Net SAE J1349/ISO 9249 (FWD/REV) |
447/538 kW (600/722 hp) |
| Note (1) |
*Excludes all fan losses. |
| Operating Weight |
70171 kg |
| Shipping Weight |
49793 kg |
| Drawbar Height (Center of Clevis) |
864 mm |
| Ground Clearance* |
725 mm |
| Height – FOPS Cab* |
4098 mm |
| Height – ROPS/Canopy* |
4406 mm |
| Height – Top of Stack* |
4356 mm |
| Length – Basic Tractor – With Drawbar |
5598 mm |
| Length – Track on Ground |
3880 mm |
| Length – With Multi-Shank Ripper |
7241 mm |
| Length – With SU-Blade |
7416 mm |
| Length – With Single-Shank Ripper |
7081 mm |
| Length – With U-Blade |
7750 mm |
| Overall Length – Basic Tractor |
5324 mm |
| Overall Length – SU-Blade/SS Ripper |
9158 mm |
| Track Gauge |
2550 mm |
| Width – Over Trunnions |
3736 mm |
| Width – Without Trunnions – 610 mm/24 in ES |
3292 mm |
| 1 Forward |
4 km/h |
| 2 Forward |
7.2 km/h |
| 3 Forward |
12.7 km/h |
| 1 Reverse |
5.2 km/h |
| 2 Reverse |
9 km/h |
| 3 Reverse |
15.8 km/h |
| Type |
3-speed planetary powershift |
| Transmission Clutch Diameter |
434.3 mm |
| Pump Type |
Variable displacement piston |
| Bulldozer Relief Valve Setting |
28000 kPa |
| Tilt Cylinder Relief Valve Setting |
20300 kPa |
| Ripper – Lift – Relief Valve Setting |
28000 kPa |
| Ripper – Pitch – Relief Valve Setting |
28000 kPa |
| Combined Pump Output – Implement |
380 l/min |
| Shoe Type |
Extreme Service (ES) |
| Width – Shoe |
610 mm |
| Shoes/Side |
44 |
| Grouser Height |
93 mm |
| Pitch |
260 mm |
| Ground Clearance |
725 mm |
| Track Gauge |
2550 mm |
| Length – Track on Ground |
3880 mm |
| Ground Contact Area |
4.74 m² |
| Track Rollers/Side |
8 |
| Number of Carrier Rollers |
1 per side (optional) |
| Fuel Tank |
1190 l |
| Cooling System |
180 l |
| Engine Crankcase* |
68 l |
| Power Train |
230 l |
| Final Drive – Each |
23 l |
| Roller Frames – Each |
64 l |
| Pivot Shaft Compartment |
33 l |
| Hydraulic Tank |
131 l |
| Note |
*With oil filters. |
| Oscillation |
351 mm |
| Hydraulically Applied Multiple-disc Steering Clutch |
392 mm |
| Spring Applied Multiple-disc Brake |
392 mm |
| FOPS |
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. |
| ROPS |
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. |
| Sound (1) |
The exterior sound pressure level for the standard machine (ISO 6395) is 115 dB(A)/111 dB(A) (sound suppressed). |
| Sound (2) |
The operator equivalent sound pressure level (ISO 6396) is 77 dB(A)/74 dB(A) (sound suppressed). |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (3.0 tons). |
| Note |
*Includes grouser height for total dimensions on hard surfaces. |
| Emissions |
Tier 2 and EU Stage II Equivalent |
| Engine Power – Net SAE J1349/ISO 9249 DIN (FWD/REV) |
608/732 hp |
| Net SAE J1349/ISO 9249 (FWD/REV) |
447/538 kW (600/722 hp) |
| Net SAE J1349/ISO 9249 DIN (FWD/REV) |
608/732 hp |
| Note (2) |
Engine ratings apply at 1,800 rpm. |
| Note (3) |
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
| Note (4) |
No derating (in FWD gears) required up to 4572 m (15,000 ft) altitude. |
| Note (1) |
Pump output measured at 1,800 rpm engine speed. |
| Note (2) |
Electro-hydraulic pilot valves assist operations of ripper and dozer controls. |
| Note (3) |
Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers. |
| Note (1) |
D10T2 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm/24 in ES shoes, and operator. |
| Note (2) |
D10T2 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm/24 in ES shoes. |
Reviews
There are no reviews yet.