MD6200

MD6200

MD6200 Rotary Blasthole Drill Specifications – 11 m (36 ft)

Description

Bit Load Up to 16 964 kg (37,400 lb)
Hole Diameter Up to 127-200 mm (5.0-7.87 in)
Engine C18® ACERT™ @ 1,800 rpm
U.S. EPA Tier 2 Equivalent – Engine C18 ACERT @ 1,800 rpm
U.S. EPA Tier 2 Equivalent – Emissions U.S. EPA Tier 2 equivalent
U.S. EPA Tier 2 Equivalent – Rated Horsepower 361 kW
U.S. EPA Tier 2 Equivalent – Elevation Capability 4572 m
U.S. EPA Tier 4 Final – Engine C18 ACERT @ 1,800 rpm
U.S. EPA Tier 4 Final – Emissions U.S. EPA Tier 4 Final
U.S. EPA Tier 4 Final – Rated Horse Power 354 kW
U.S. EPA Tier 4 Final – Elevation Capability 3658 m
Compressor – Rotary Drilling 32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi)
Angle Drilling Available 30° to –15° in 5° increments
DTH Drilling Includes tool lubrication system
Rotary Drilling Optional tool lubrication system
Note With the compressor’s electronic compressor controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both compressor packages are configured with this feature.
Choice (1) Low pressure 8.6 bar (125 psi)
Choice (2) High pressure 24.1 bar (350 psi)
Components (1) Coolers with easy cleaning access
Components (2) Replaceable cooler core sections
Components (3) Functional in ambient temperature of up to 52° C (125° F)
Components (4) Automatic variable speed fan control
Climate Level 1 Standard Fluids and Lubricants (1) Rated down to –1° C (30° F)
Climate Level 1 Standard Fluids and Lubricants (2) Withstands high heat up to 52° C (125° F)
Climate Level 2 Arctic Fluids and Lubricants Rated down to –18°C (0°F)
Features (1) Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Features (2) Slip resistant walkways
Features (3) Fuel tank capacity 833 L (220 gal)
Components (1) Three leveling jacks provide leveling on a 7° bench (any orientation)
Components (2) Heavy duty tow hooks (front end)
Components (3) Four (4) lift lugs, for use with cables or chains
Choice (1) Fixed access ladders to the cab area
Choice (2) Small platform to the cab with access ladders
Components (1) Drill pipe thread greaser with remote fill tank or disposable grease bucket
Model Cat 336 Excavator type
Ground Clearance 533 mm
Carrier Rollers Three (double post)
Triple Grousers (1) 600 mm (23.6 in); 1.44 bar (20.8 psi) ground pressure
Components (1) Auxiliary circuit pump
Components (2) Fan pump
Components (3) Two primary pumps
Components (4) Charge pump
Components (5) Wiring for third party interface
11 m (36 ft) Mast Standard Drilling – Bit load (single-pass) 16964 kg
11 m (36 ft) Mast Standard Drilling – Hoist capacity Up to 11 907 kg (Up to 26,250 lb)
11 m (36 ft) Mast Standard Drilling – Hoist speed 1.32 m/s
11 m (36 ft) Mast Standard Drilling – Hole depth range – Multi-pass depth Down to 47.5 m (Down to 156 ft)
11 m (36 ft) Mast Standard Drilling – Hole depth range – Single-pass depth 11 m
11 m (36 ft) Mast Standard Drilling – Hole diameter range 127-200 mm (5.0-7.87 in)
11 m (36 ft) Mast Standard Drilling – Pull-down capacity Up to 15 876 kg (Up to 35,000 lb)
Compressor – DTH Drilling 29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi)
DTH Drilling – 1050 cfm/350 psi 29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi) includes 113 L (30 gal) tool oiler
Rotary or DTH drilling, connection point for foam injection – 1150 cfm/125 psi 32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi)
Body length 9.65 m
Height mast down 3.5 m
Height mast up 16.535 m
Length mast down 17.6 m
Mast only length 15.721 m
Note *For width with platform access to cab or service platform walkway contact the factory.
Width cab end* 3.6 m
Width non-cab end 3.6 m
9.1 m (30 ft) pipes for 11 m (36 ft) Mast – Accepts quantity of four (4) – Option 1 101 mm
9.1 m (30 ft) pipes for 11 m (36 ft) Mast – Accepts quantity of four (4) – Option 2 114 mm
9.1 m (30 ft) pipes for 11 m (36 ft) Mast – Accepts quantity of four (4) – Option 3 127 mm
9.1 m (30 ft) pipes for 11 m (36 ft) Mast – Accepts quantity of four (4) – Option 4 140 mm
9.1 m (30 ft) pipes for 11 m (36 ft) Mast – Accepts quantity of four (4) – Option 5 152 mm
High Volume Water Injection – Maximum – Tank Above Deck – Capacity 757 l
High Volume Water Injection – Maximum – Tank Below Deck – Capacity (Insulated for Extreme Cold Weather) 757 l
Water Injection – Tank Mounted Below Front Deck – Components Water flow meter, volume control, tank fill level indicator
Water Injection – Tank Mounted Below Front Deck – Feature Self-purging for winterization
Feature (1) Dual starter motors
Feature (2) Ether starting aid
Feature (3) Common air intake filters provide +500 hour service interval in normal operating conditions
Feature (4) Tier 4 Final package complete with DEF/Engine Shutdown Control Package
Choice (3) Platform access to the cab with full length service access walkway also with access ladders and self-closing gates
Components (5) Oil sampling ports
11 m (36 ft) Mast – Hoist Up to 11 907 kg (Up to 26,250 lb)
11 m (36 ft) Mast – Multi-pass depth Down to 47.5 m (Down to 156 ft)
11 m (36 ft) Mast – Pulldown – rated single cylinder pull-down/hoist system Up to 15 876 kg (Up to 35,000 lb)
11 m (36 ft) Mast – Single-pass depth 11 m
Features (1) CE compliant
Features (2) CSA certifiable
Features (3) EAEU certifiable
Features (4) CSA certified
Features (5) MDG15 and MDG41 aligned
Components (7) Drill tool lubricator is included with selection of DTH Compressor
Components (7) Drill tool lubricator (optional)
Components (1) Track chain guards and guides
Features (1) Pipe carousel:
– 11 m (36 ft) Mast: Accepts quantity of four (4) 9.1 m (30 ft) pipes
Features (2) Pre-split angle drilling package for negative angle (–15 to 30°) in 5° increments
Features (3) Standard angle drilling package for (0 to 30°) in 5° increments
Features (4) Hydraulically actuated, self-indexing pipe carousel accepts various pipe diameters
Features (5) Bit changes are above deck level
Features (6) Single cylinder pulldown/hoist system
Features (7) Deck wrench fits flats of corresponding drill pipe diameters and DTH hammer
Features (8) Configured with roller deck bushing (for low pressure/tricone drilling)
Features (9) Two-piece deck bushing (for high pressure DTH drilling)
Features (10) Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating
Features (11) Variable hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in)
Features (12) Closed circuit camera mounted in mast to view pipe carousel/top drive operation
Features (13) Pipe positioner for angle drilling, multi-pass pipe handling
Features (14) Manual pipe catcher – One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket
Components (1) One-piece roller deck bushing
Components (2) Pipe positioner clamps
Components (3) Deck wrench
Components (4) Bit sub
Components (5) Top sub
Components (6) Pipe wiper seal
Components (1) Two-piece bushing
Components (2) Pipe positioner clamps
Components (3) Deck wrench
Components (4) Shock sub
Components (5) Cross over subs
Components (6) Pipe wiper seal
Torque – Single Motor 11700 N·m
Rotation Speed 0-150 rpm
Components (1) Output shaft with box-end API-IF (NC46) 101 mm (4 in) thread
Components (2) Rotary torque control
Components (3) Virtual rotary head travel interlocks
Cab Design – Compact FOPS cab has 1.9 m² (20.5 ft²) floor space with an integrated operator station
– Cab rubber shock-mounts absorb mechanical vibration
– Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) screens; color, high-definition and 12 volt power port
– Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
– Power convertor 24V to 12V
– Radio-ready for communication and entertainment stereo
– Two swing out doors and Cat keyed locks
– Literature holder
– Storage area suitable for lunchbox
Cab Packages – Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard
– Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller window guard
Seating – Seat swivels, locks and has two point retractable/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Windows – Large windows front, rear and right cab side; full length drill window with guard
– Window shades (option)
– Windshield wiper with a common washer tank
– Manometer Pressure Gauge (option)
Lighting – LED interior lights, backlit joysticks and keypads
– Flood lights for the drill perimeter; area spotlights
– Lighting is 4,200 lumens
– Mast beacon and tram clearance light
HVAC – Floor heating vent
– Filter access from deck, 500 hour service interval
– Defogging HVAC vents on main window
Cameras – Three (3) CC cameras (front and left side) providing 360° vision coverage from operators seat; camera on the mast to view pipe carousel/top drive operation
Components (1) All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (2) Rotary torque control
Components (3) Virtual rotary head travel stops
Components (4) Pipe positioner engaged/disengaged indicator
Components (5) Drill depth meter
Components (6) Drill performance and display system
Components (7) Delayed engine shut down
Components (8) Filter indicators for hydraulic, fuel, compressor and engine
Components (9) Jack pressure sensors shown
Components (10) Data logging of machine health with warnings and fault code records with export capability
Components (11) Dust suppression control
Components (12) Mast lock indicator
Components (13) ECM proportional fan speed control system
Components (14) Tram interlock, machine stability limits
Components (15) Tram interlock, pipe in hole
Components (16) Tram interlock, mast up and locked or down and parked
Components (17) Tram interlock, jacks retracted
Components (18) Tram interlock, winch parked
Components (19) Cab environment controls (AC, heat, fan speeds)
Components (20) Pre wired for Terrain and Autonomous Operation
Type (1) Autonomous ready
Components (1) Drill depth meter
Components (2) Drill Assist (auto level, auto retract jacks, auto raise and lower mast, single-pass rotary auto drill)
Components (3) Cat Terrain ready
Components (4) Product Link Elite™ – Satellite, Cellular, Dual (options)
Water Injection – Tank Mounted Below Front Deck 757 l
High Volume Water Injection – Maximum – Tanks Total Capacity 1514 l
Water Injection plus Dust Collector (1) 76.5 m³/min (2,700 ft³/min) dust collector; includes standard water injection
Water Injection plus Dust Collector (2) Self-cleaning filters, dust chute clean-out door
Choices (1) Static dust curtains, four sides boxed enclosed
Choices (2) Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector)
Choices (3) Tram off spray system (option)
Feature (1) Approach angle of 15 degrees facilitates loading and unloading on a lowboy
Components (1) Seven (7) emergency stop buttons
Components (2) Hinged window guard over the full length of the front drill window
Components (3) Conditional safety interlocks
Components (4) Self-closing gates
Components (5) Electric horn activated by push button in the cab
Components (6) Automatic tram alarm with yellow strobe light
Components (7) Battery disconnect and starter switches can be locked out
Components (8) Air hose retention devices
Components (9) Slip resistant platform surfaces
Components (10) Machine lifting provisions
Components (11) FOPS Certified Operator Cab
Package (1) Basic – Centralized manual lubrication for all pivot points, gravity fill for fuel and water
Package (2) Standard – Automated lubrication system, fast fill for fuel and water
Package (3) Premium – Automated lubrication system, fast fill fuel and water, service center for lubricant drain, plus fill blowdown hose
Working Weight Range 37 500-41 700 kg (82,700-92,000 lb)

Reviews

There are no reviews yet.

Be the first to review “MD6200”

Your email address will not be published. Required fields are marked *