PMC-V

PMC-V

In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation.

Description

Operating System µITRON RTOS
Processor 32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
RAM Memory 4Mbytes CMOS Static RAM, 4Mbytes Flash
Height 148 mm
Length 335 mm
Width 241 mm
Components (1) 320 × 240 pixel b/w graphics display
Components (2) IP 68
Components (3) Optional additional Profibus communication channel for communication with third party computer
Components (4) 12 SKK24 sockets for power supply, communication, sensors and actuators
Components (5) Power: 12 W
Types (1) Europe: ATEX
Types (2) U.S.: MSHA
Types (3) More certifications on demand
Types (4) Australia: IECEx, ANZEx
Types (5) China: MA
Types (6) Russia: GOST
Supply Current – Maximum Ratings 1.5 A
Supply Current – Typical Value 1 A
Supply Voltage – Maximum Ratings 9.5 V – 13.2 V
Supply Voltage – Typical Value 12 V DC
Temperature – Maximum Ratings -20° C – +40° C (-4° F – +104° F)
Temperature – Symbol Tamb
Temperature – Typical Value 20 °C
Socket 1 – Pin 1 Optocoupler Anode
Socket 1 – Pin 2 Relay Contact NO: a
Socket 1 – Pin 3 Relay Contact NO: b
Socket 1 – Pin 4 Optocoupler Kathode
Socket 10 – Pin 1 +12 V (A)
Socket 10 – Pin 2 Measurement Input 3
Socket 10 – Pin 3 +8.2 V
Socket 10 – Pin 4 GND
Socket 11 – Pin 1 Options
Socket 11 – Pin 2 Options
Socket 11 – Pin 3 Options
Socket 11 – Pin 4 Options
Socket 12 – Pin 2 Profibus: a (internal)
Socket 12 – Pin 3 Profibus: b (internal)
Socket 2 – Pin 1 +12 V (A)
Socket 2 – Pin 2 Serial Interface: RxD
Socket 2 – Pin 3 Serial Interface: TxD
Socket 2 – Pin 4 GND
Socket 3 – Pin 1 +12 V (B)
Socket 3 – Pin 2 Serial Interface: RxD
Socket 3 – Pin 3 Serial Interface: TxD
Socket 3 – Pin 4 GND
Socket 4 – Pin 1 +12 V (C)
Socket 4 – Pin 2 Serial Interface: RxD
Socket 4 – Pin 3 Serial Interface: TxD
Socket 4 – Pin 4 GND
Socket 5 – Pin 1 Options
Socket 5 – Pin 2 Options
Socket 5 – Pin 3 Options
Socket 5 – Pin 4 Options
Socket 6 – Pin 2 Profibus: a (internal)
Socket 6 – Pin 3 Profibus: b (internal)
Socket 7 – Pin 1 +12 V Input
Socket 7 – Pin 2 Serial Interface: TxD
Socket 7 – Pin 3 Serial Interface: RxD
Socket 7 – Pin 4 GND Input
Socket 8 – Pin 1 +12 V (B)
Socket 8 – Pin 2 Measurement Input 1
Socket 8 – Pin 3 +8.2 V
Socket 8 – Pin 4 GND
Socket 9 – Pin 1 +12 V (C)
Socket 9 – Pin 2 Measurement Input 2
Socket 9 – Pin 3 +8.2 V
Socket 9 – Pin 4 GND
Socket 11 – Pin 1 (1) AB
Socket 11 – Pin 1 (2) **
Socket 11 – Pin 2 (1) AB (Profibus: a [external])
Socket 11 – Pin 2 (2) **
Socket 11 – Pin 3 (1) AB (Profibus: b [external])
Socket 11 – Pin 3 (2) **
Socket 11 – Pin 4 (1) **
Socket 11 – Pin 4 (2) AB
Socket 5 – Pin 1 (1) AB
Socket 5 – Pin 1 (2) **
Socket 5 – Pin 2 (1) AB (Profibus: a [external])
Socket 5 – Pin 2 (2) **
Socket 5 – Pin 3 (1) AB (Profibus: b [external])
Socket 5 – Pin 3 (2) **
Socket 5 – Pin 4 (1) AB
Socket 5 – Pin 4 (2)

Reviews

There are no reviews yet.

Be the first to review “PMC-V”

Your email address will not be published. Required fields are marked *