| Emissions |
Optional U.S. EPA Tier 1 Equivalent |
| Note |
* Excludes all fan losses. |
| Engine Model |
Cat® 3408C |
| Flywheel Power |
302 kW |
| Bore |
137 mm |
| Stroke |
152 mm |
| Displacement |
18 l |
| Engine Power – Gross Power – SAE J1995* |
330 kW |
| Engine Power – Net Power – SAE J1349/ISO 9249 |
302 kW |
| Net Power – SAE J1349/ISO 9249 |
302 kW |
| Operating Weight |
48784 kg |
| Shipping Weight |
36154 kg |
| 1 Forward |
3.9 km/h |
| 2 Forward |
6.8 km/h |
| 3 Forward |
11.9 km/h |
| 1 Reverse |
4.7 km/h |
| 2 Reverse |
8.4 km/h |
| 3 Reverse |
14.7 km/h |
| 1 Forward – Drawbar Pull |
725000 N |
| 2 Forward – Drawbar Pull |
400000 N |
| 3 Forward – Drawbar Pull |
218000 N |
| Pump Type |
Piston-type geared from flywheel |
| Pump Output – Implement |
239 l/min |
| Tilt Cylinder Flow – Rod End Flow |
137 l/min |
| Tilt Cylinder Flow – Head End Flow |
167 l/min |
| Bulldozer Relief Valve Setting |
26200 kPa |
| Tilt Cylinder Relief Valve Setting |
19300 kPa |
| Ripper – Lift – Relief Valve Setting |
26200 kPa |
| Ripper – Pitch – Relief Valve Setting |
26200 kPa |
| Shoe Type |
Extreme Service |
| Width – Shoe |
610 mm |
| Shoes/Side |
43 |
| Pitch |
240 mm |
| Ground Clearance |
596 mm |
| Track Gauge |
2250 mm |
| Length – Track on Ground |
3470 mm |
| Ground Contact Area |
4.24 m² |
| Track Rollers/Side |
8 |
| Grouser Height – Extreme Service (ES) |
84 mm |
| Fuel Tank |
889 l |
| Cooling System |
163 l |
| Engine Crankcase* |
45.5 l |
| Power Train |
164 l |
| Final Drive – Each |
15 l |
| Roller Frames – Each |
45 l |
| Pivot Shaft Compartment |
30 l |
| Hydraulic Tank |
77.2 l |
| Capacity – SAE J1265 |
13.5 m³ |
| Digging Depth |
606 mm |
| Ground Clearance |
1422 mm |
| Height |
1934 mm |
| Maximum Tilt |
940 mm |
| Total Operating Weight** – With Blade and Single-Shank Ripper |
48784 kg |
| Weight* – Without Hydraulic Controls |
6863 kg |
| Width – Over End Bits |
4310 mm |
| Capacity – SAE J1265 |
16.4 m³ |
| Digging Depth |
606 mm |
| Ground Clearance |
1422 mm |
| Height |
1934 mm |
| Maximum Tilt |
1014 mm |
| Total Operating Weight** – With Blade and Single-Shank Ripper |
49392 kg |
| Weight* – Without Hydraulic Controls |
7388 kg |
| Width – Over End Bits |
4650 mm |
| Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole |
882 mm/817 mm (34.7 in/32.2 in) |
| Maximum Penetration – Standard Tip |
1231 mm/1727 mm (48.5 in/68 in) |
| Maximum Penetration Force – Shank Vertical |
158 kN/172 kN (35,520 lbf/38,667 lbf) |
| Note (1) |
* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator. |
| Note (2) |
Single-shank ripping arrangement weight includes pin puller. |
| Number of Shank Holes |
3-Mar |
| Overall Beam Width |
NA |
| Pry-Out Force |
332 kN/331 kN (74,637 lbf/74,412 lbf) |
| Total Operating Weight* – With SU-Blade and Ripper |
48784 kg |
| Weight – With One Shank |
4293 kg/4420 kg (9,464 lb/9,744 lb) |
| Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole |
879 mm |
| Maximum Penetration – Standard Tip |
798 mm |
| Maximum Penetration Force – Shank Vertical |
154 kN |
| Note (1) |
* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator. |
| Number of Shank Holes |
2 |
| Overall Beam Width |
1330 mm |
| Pry-Out Force – Multi-Shank Ripper with One Tooth |
361 kN |
| Total Operating Weight* – With SU-Blade and Ripper |
48221 kg |
| Weight – With One Shank |
4153 kg |
| Winch Model |
PA140VS |
| Weight* |
1790 kg |
| Oil Capacity |
15 l |
| Increased Tractor Length |
557 mm |
| Drum Width |
320 mm |
| Wire Cable Diameter – Optional |
32 mm |
| Wire Cable Diameter – Recommended |
28 mm |
| Note (1) |
* Includes blade tilt cylinder. |
| Note (2) |
** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator. |
| Note (1) |
* Includes blade tilt cylinder. |
| Note (2) |
** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator. |
| Drawbar Height (Center of Clevis)* |
765 mm |
| Ground Clearance* |
596 mm |
| Height – FOPS Cab* |
3820 mm |
| Height – ROPS/Canopy* |
4000 mm |
| Height – Top of Stack* |
4005 mm |
| Length – Basic Tractor – With Drawbar |
5180 mm |
| Length – Basic Tractor – With Winch |
5545 mm |
| Length – Track on Ground |
3470 mm |
| Length – With Multi-Shank Ripper |
6538 mm |
| Length – With SU-Blade** |
6880 mm |
| Length – With Single-Shank Ripper |
6529 mm |
| Length – With U-Blade |
6967 mm |
| Note (1) |
*Includes grouser height for total dimensions on hard surfaces. |
| Note (2) |
**Includes drawbar. |
| Overall Length – Basic Tractor |
4910 mm |
| Overall Length – SU-Blade/SS Ripper |
8230 mm |
| Track Gauge |
2250 mm |
| Width – Over Trunnions |
3300 mm |
| Width – Without Trunnions – Standard Shoe |
2880 mm |
| Engine Power – EU 80/1269 |
302 kW |
| Note (1) |
Capable of meeting U.S. EPA Tier 1 Equivalent. |
| Note (2) |
Engine ratings apply at 1,900 rpm. |
| Note (3) |
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (4) |
No derating required up to 2286 m (7,500 ft) altitude. |
| Note (1) |
Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi). |
| Note (2) |
Complete system consists of pump, tank with filter, valves, lines, linkage and control levers. |
| Note (2) |
+Includes (1) shank, add 347 kg for each additional shank. |
| Note |
* With oil filters. |
| FOPS |
FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II. |
| Note |
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment. |
| ROPS |
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008. |
| Sound |
The declared dynamic operator sound pressure level is 85 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. |
| Note |
Positive Pin Retention Track. |
| Note (1) |
Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator. |
| Note (2) |
Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes. |
| Maximum Drum Capacity – Optional Cable Length |
62 m |
| Maximum Drum Capacity – Recommended Cable Length |
78 m |
| Note (1) |
* Weight: Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
| Note (2) |
Variable speed, hydraulically driven, dual braking system, three‑roller fairlead. |
| Wire Cable Ferrule Size – Length |
70 mm |
| Wire Cable Ferrule Size – Outside Diameter |
60 mm |
| Brakes |
Brakes meet the standard ISO 10265. |
Reviews
There are no reviews yet.