PL61

PL61

The PL61 is part of a full line of purpose-built Cat® pipe layers designed for performance, safety and serviceability. Easy transport width, combined with the experienced support of the Cat dealer network, means this key pipe line equipment is available when and where you need it.

Description

Engine Model Cat C4.4 ACERT™
Flywheel Power 97 kW
Cat C4.4 ACERT Emissions U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Cat C7.1 ACERT Emissions China Nonroad Stage III, equivalent to Tier 3/Stage IIIA
Engine Power – 2,000 rpm – ISO 14396 117 kW
Engine Power – 2,000 rpm – ISO 14396 (DIN) 117 kW
Engine Power – 2,000 rpm: SAE J1995 119 kW
Net Power – 2,200 rpm – ISO 9249 97 kW
Net Power – 2,200 rpm – SAE J1349 95 kW
Track Gauge 2000 mm
Track on Ground 2645 mm
Ground Contact Area – LGP 4.46 m²
Ground Contact Area – Narrow 3.29 m²
Ground Pressure – LGP 40.9 kPa
Ground Pressure – Narrow 54 kPa
Ground Pressure(1) – LGP 40.8 kPa
Ground Pressure(1) – Narrow 53.9 kPa
Note (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology.
Number of Shoes/Rollers – Each Side 40/8
Track Shoe Width – Narrow/LGP 560/760 mm (22/30 in)
Cab, 560 mm (22 in) Shoes 18170 kg
Cab, 560 mm (22 in) Shoes(1) 18090 kg
Cab, 760 mm (30 in) Shoes 18640 kg
Cab, 760 mm (30 in) Shoes(1) 18560 kg
Note (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology.
Lift Capacity 18144 kg
Track Gauge 2000 mm
Length – Track on Ground 2645 mm
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg of refrigerant which has a CO2 equivalent of 1.859 metric tons.
Boom Height (at SAE 1.22 m [4 ft] overhang) 6220 mm
Height – Top of ROPS: Canopy/Cab 2985 mm
Height of Machine from Tip of Grouser to Top of Stack(1) 2850 mm
Machine Height – Tip of Winch 2570 mm
Note (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology.
Operating Length 3850 mm
Width – Counterweight Extended 4750 mm
Width – Tractor – Counterweight Retracted 3240 mm
Width – Tractor – Counterweight/Boom Removed 3190 mm
Width – Tractor – With 560 mm [22 in] Shoes 2560 mm
Width – Tractor – With 760 mm [30 in] Shoes 2760 mm
DEF Tank(1) 19 l
Fuel Tank 260 l
Net Power – 2,200 rpm – ISO 9249 (DIN) 97 kW
Note (1) All nonroad Tier 4 Final, Stage IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (3) (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology.
Cab, 560 mm (22 in) Shoes 17110 kg
Cab, 560 mm (22 in) Shoes(1) 17040 kg
Cab, 760 mm (30 in) Shoes 17590 kg
Cab, 760 mm (30 in) Shoes(1) 17510 kg
Note (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology.

Reviews

There are no reviews yet.

Be the first to review “PL61”

Your email address will not be published. Required fields are marked *