Engine Model |
Cat C3.3B DIT (turbo) |
Net Flywheel Power |
53.6 kW |
Gross Power – SAE J1995 |
55.4 kW |
Net Power – SAE 1349 |
53.6 kW |
Displacement |
3.3 l |
Stroke |
120 mm |
Bore |
94 mm |
Net Power – ISO 9249 |
54.1 kW |
Net Power SAE 1349† |
54 kW |
Operating Weight |
3368 kg |
Rated Operating Capacity |
975 kg |
Breakout Force – Tilt Cylinder |
3336 kg |
Rated Operating Capacity with Optional Counterweight |
1088 kg |
Tipping Load |
1950 kg |
Bucket Pin Height – Carry Position |
200 mm |
Bucket Pin Height – Maximum Lift |
3154 mm |
Bumper Overhang – Behind Rear Axle |
1083 mm |
Clearance at Maximum Lift and Dump |
2465 mm |
Departure Angle |
26° |
Ground Clearance |
226 mm |
Height – Top of Cab |
2110 mm |
Length – With Bucket on Ground |
3708 mm |
Length – Without Bucket |
2993 mm |
Maximum Dump Angle |
39° |
Maximum Overall Height |
4032 mm |
Maximum Reach – With Arms Parallel to Ground |
1388 mm |
Rack Back Angle – Maximum Height |
96° |
Reach – Maximum Lift/Dump |
600 mm |
Turning Radius from Center – Bucket |
2181 mm |
Turning Radius from Center – Coupler |
1401 mm |
Turning Radius from Center – Machine Rear |
1806 mm |
Vehicle Width over Tires |
1676 mm |
Wheel Base |
1249 mm |
Hydraulic Flow – High Flow XPS – Hydraulic Power (Calculated) |
57 kW |
Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Flow |
121 l/min |
Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Pressure |
28000 kPa |
Hydraulic Flow – Standard – Hydraulic Power (Calculated) |
33 kW |
Hydraulic Flow – Standard – Loader Hydraulic Flow |
86 l/min |
Hydraulic Flow – Standard – Loader Hydraulic Pressure |
23000 kPa |
ROPS |
ISO 3471:2008 |
FOPS |
ISO 3449:2005 Level I |
FOPS Level II |
ISO 3449:2005 Level II |
Travel Speed – Forward or Reverse – One Speed |
12.5 km/h |
Travel Speed – Forward or Reverse – Two Speed Option |
17.7 km/h |
Cooling System |
14 l |
Engine Crankcase |
11 l |
Fuel Tank |
94 l |
Hydraulic System |
52 l |
Hydraulic Tank |
39 l |
Chain Box – Each Side |
12.7 l |
Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Net Power ISO 9249† |
54.6 kW |
Note |
†Tier 4 Interim equivalent engine offered only for Australia/New Zealand, Macedonia, Ukraine and South Korea. |
Peak Torque – 1,600 rpm – SAE J1995 |
265 N·m |
Inside Cab** |
81 dB(A) |
Note (1) |
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
Note (2) |
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab*** |
101 dB(A) |
Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Rated Operating Capacity |
975 kg |
Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Reviews
There are no reviews yet.