| Engine Model |
Cat C2.2 |
| Net Flywheel Power |
44 kW |
| Gross Power – SAE J1995 |
44.9 kW |
| Net Power – SAE 1349 |
44 kW |
| Displacement |
2.2 l |
| Stroke |
100 mm |
| Bore |
84 mm |
| Net Power – ISO 9249 |
44.4 kW |
| Peak Torque – 1,500 rpm – SAE J1995 |
183 N·m |
| Operating Weight |
2818 kg |
| Rated Operating Capacity |
839 kg |
| Breakout Force – Tilt Cylinder |
1807 kg |
| Rated Operating Capacity with Optional Counterweight |
885 kg |
| Tipping Load |
1679 kg |
| Bucket Pin Height – Carry Position |
214 mm |
| Bucket Pin Height – Maximum Lift |
3001 mm |
| Bucket Pin Reach – Maximum Lift |
224 mm |
| Bumper Overhang – Behind Rear Axle |
894 mm |
| Clearance at Maximum Lift and Dump |
2254 mm |
| Departure Angle |
27.9° |
| Ground Clearance |
170 mm |
| Height – Top of Cab |
2029 mm |
| Length – With Bucket on Ground |
3233 mm |
| Length – Without Bucket |
2523 mm |
| Maximum Dump Angle |
47.4° |
| Maximum Overall Height |
3832 mm |
| Maximum Reach – With Arms Parallel to Ground |
1249 mm |
| Rack Back Angle – Maximum Height |
88.2° |
| Reach – Maximum Lift/Dump |
653 mm |
| Turning Radius from Center – Bucket |
1976 mm |
| Turning Radius from Center – Coupler |
1102 mm |
| Turning Radius from Center – Machine Rear |
1513 mm |
| Vehicle Width over Tires |
1497 mm |
| Wheel Base |
1054 mm |
| Hydraulic Flow – High Flow – Hydraulic Power (Calculated) |
38 kW |
| Hydraulic Flow – High Flow – Maximum Loader Hydraulic Flow |
99 l/min |
| Hydraulic Flow – High Flow – Maximum Loader Hydraulic Pressure |
23000 kPa |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) |
26.5 kW |
| Hydraulic Flow – Standard – Loader Hydraulic Flow |
69 l/min |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure |
23000 kPa |
| ROPS |
ISO 3471:2008 |
| FOPS |
ISO 3449:2005 Level I |
| FOPS Level II |
ISO 3449:2005 Level II |
| Travel Speed – Forward or Reverse – One Speed |
12.3 km/h |
| Travel Speed – Forward or Reverse – Two Speed Option |
17.8 km/h |
| Cooling System |
12 l |
| Engine Crankcase |
10 l |
| Fuel Tank |
57 l |
| Hydraulic System |
45 l |
| Hydraulic Tank |
34 l |
| Chain Box – Each Side |
7 l |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Inside Cab** |
83 dB(A) |
| Note (1) |
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (2) |
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab*** |
101 dB(A) |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Rated Operating Capacity |
839 kg |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
Reviews
There are no reviews yet.